The choice of a advertising inflatable structure Returies first on its pressure mode: a captive air-tight model retains its shapeless shape for several days, while a pulsed air structure requires a continuous electric blower and tolerates the micro-perforations on animated shows.
An inflatable arch structure the passage on a sports race or marks the entrance of an external point of sale: it requires a rigorous tauganage and the lats adapted to the force of the wind. The captive advertising ball, swollen with helium, targets visibility to 360 degrees more than 20 meters high, ideal for being spotted from a fair or a large outdoor event. For limited ceiling exposure halls, the captive air inflatable totem provides reduced floor space within one square meter while remaining perfectly silent.
The PVC reinforced in 600 g / m² is required for a structure exposed to weather on several seasons. Below this grammage, especially with uncoated conventional polyester, the fabric relaxes under the effect of moisture and loses its original tension after only a few days of exposure. For a temporary indoor use of a few weeks, a polyurethane coated polyester of 220 g / m² offers a good compromise between lightness to transport and net visual rendering.
The distinction between captive air and pulsed air determines your logistics autonomy in the field. The captive air functions like an air chamber: it inflates it once with an electric inflator, the valve closes, and the support remains in place without any noise or need to take electrical outlet nearby. Conversely, the pulsed air uses an integrated permanent fan: essential for very large formats such as arches over 5 meters wide, this system requires constant electrical connection throughout the duration of the event.
The direct sublimation printing in the polyester mesh ensures that colors do not peel up during tight folding and storage of the structure. Unlike a simple adhesive transfer that may crack after two or three deflation sessions, the total printing merges the ink with the support to withstand friction. For complex logos or interchangeable sponsors from one season to the next, the use of high-density velcro strips sewn directly on the structure to adapt the message without redeeming a complete airport.
For a scheduled event, have a meaningful manufacturing time of 10 working days to validate the correct 3D fire and ensure the press press tests for 24 hours before shipping. Each structure comes with its full anchor kit (upper stakes or bags) and its reinforced transport bag. The choice of the ballast is directly dependent on the location surface: cast iron plates or sandbags for tar, deep anchor stakes for land or grass.
